Characterization of Minerals, Metals, and Materials 2018
This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Coverage is well-rounded from minerals, metals, and materials characterization and developments in extraction to the fabrication and performance of materials. In addition,...
| Other Authors: | , , , |
|---|---|
| Format: | eBook |
| Language: | English |
| Published: |
Cham
Springer International Publishing
2018, 2018
|
| Edition: | 1st ed. 2018 |
| Series: | The Minerals, Metals & Materials Series
|
| Subjects: | |
| Online Access: | |
| Collection: | Springer eBooks 2005- - Collection details see MPG.ReNa |
Table of Contents:
- Comparison Between Epoxy Matrix Composites Reinforced with Ramie Fabric under Pressure and Vacuum
- Charpy Impact Test in Polyester Matrix Composites Reinforced With Hybrid Blanket of the Jute and Malva Fibers
- Part 7. Analysis of Surfaces and Interfaces
- Applications of Aberration-corrected Low-energy Electron Microscopy for Metal Surfaces
- ZnO Thin Films of Flowered-Fibrous Micro/Nanowebs on Glass Substrates Using the Spray Pyrolysis Method
- Intergranular Cracking of High Strength Alloyed Brass Rods
- Part 8. Mechanical Behaviors of Materials
- Determination of Microstructure-based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining
- Precipitating Behaviour of Second Phase Particles in Lightweight Fe-Mn-Al-C-N Stainless Steel
- Local Texture Evolution and Mechanical Performance of Ultra-High-Speed Friction Stir Weld of AA 6111-T4 sheets
- Part 9. Characterization of Powder Materials
- Characterization of HPGR Pre-treated Sinter Feed
- Characterization of Tensile Properties of Epoxy Matrix Composites Reinforced with Fique Fabric Fiber
- Clay Smectite Synthetic: Characterization and Application in Nanocomposites
- Comparison of Performance between Granite Waste Pigments Based Paints and Soils Pigments Based Paints
- Development and Characterization of Recycled-HDPE/EVA Foam Reinforced with Babassu Coconut Epicarp Fiber Residues
- Evaluation of Microcapsules of PBSL/MMT-K and PBSL/OMMT-K Nanocomposites
- Evaluation of the Quality of Concrete with Waste of Construction and Demolition
- Evaluation of Two Different Pulsed Plasma Nitriding Conditions on Steel Properties
- Flexural Mechanical Characterization of Polyester Composites Reinforced with Jute Fabric
- Influence of Coupling Agent on the Modification Effects of Vanadium Tailing as a Polymer Filler
- Influence of Electron-beam Irradiation on the Properties of LDPE/EDPM Blend Foams
- Process Improvement Study on the Gradation Uniformity of Steel Slag Asphalt Concrete Aggregate
- Research on the Interaction of Humic Acid with Iron Minerals
- Study of Different Process Additives Applied to Polypropylene
- Study of the Durability of Mortars with Effluent Sludge from Paper Industry Exposed to Salt Spray
- Study of the Incorporation of Residue of Ornamental Rocks in CeramicTiles
- Study of the Incorporation of Smectite in Powder Coating
- Study of the Mineralogical Composition of the Tailings of Coscotitlán, Hidalgo, Mexico
- The Influence of Clay Reinforcement on the Properties of Recycled Polymer Foams
- The Quality of Tiles in Red Ceramic in Northwest of Rio de Janeiro and Southeast of Minas Gerais
- Evaluation of Urea Encapsulation by Microcapsules of PHB/MMT and PHB/OMMT Nanocomposites
- Part 12. Thermal Processing and Analysis
- Buildup Formation Mechanism of Carbon Sleeve in Continuous Annealing Furnace for Silicon Steel
- Pulse Parameter Characterization in Microdrilling of Maraging Steel 300 Alloy
- Characterization of Coke-making Coals of High Reactivity from Northwest China
- The Anodic Behavior of Electro-Deoxidation of Titanium Dioxide in Calcium Chloride Molten Salt
- Part 13. Poster Session
- Addition of Dregs in Mixed Mortar: Evaluation of Physical and Mechanical Properties
- Adhesion Study at Advanced Ages in Multipurpose Mortars
- Applications and Opportunities of Nanomaterials in Construction and Infrastructure
- Automated Optical Serial Sectioning Analysis of Phases in a Medium Carbon Steel
- Characterization of a Brazilian Bentonite for its Use in the Oil and Gas Industry
- Influence of the Areal Density of Layers in the Ballistic Response of a Multilayered Armor System Using Box-behnken Statistical Design
- Influence of the Blocks and Mortar’s Compressive Strength on the Flexural Bond Strength of Concrete Masonry
- Influence of Two Solubilization Conditions at 718 Superalloy Hardness and Microstructure
- Irradiation Influence on the Properties of HMS-Polypropylene Clay/AgNPs Nanocomposites
- Limit Speed Analysis and Absorbed Energy in Multilayer Armor with Epoxy Composite Reinforced with Mallow Fibers and Mallow and Jute Hybrid Fabric
- Mechanical, Thermal and Electrical Properties of Polymer (Ethylene Terephthalate - PET) Filled with Carbon Black
- Mineralogical Analysis of A Chrome Ore from South Africa
- Pilot Trial of Detoxification of Chromium Slag in Cyclone Furnace and Preparation of Glass-ceramics with the water-quenched melt
- Preparation of Refractory Material from Ferronickel Slag
- Part 1. Characterization Methods
- On FIB Milling Parameters
- Part 2. Characterization of Ceramics
- Preparation and Characteristics of Steel Slag Ceramics from Converter Slag
- In-situ XRD Investigation of Bauxite Dehydroxylation
- The Investigation of Humics as a Binder for LiFePO4 Cathode Using in Lithium Ion Battery
- Evaluation of Brazilian Bentonite Modified by Acid Attack in Biofuel Production
- Part 3. Characterization of Non-ferrous Metals
- Synthesis and Characterization on Nickel Orthosilicate Anode of Lithium-ion Battery
- Eletrochemical Behavior and Corrosion Properties of Ti-6Al-4V Alloy Made by Selective Laser Melting for Immersion in Artificial Seawater at Different Temperature
- Part 4. Microstructure and Performance of Materials
- Correlation of Microstructure to Dynamic Properties in Two Grades of Alumina
- Part 5. Characterization and Uses of Metallurgical Slags
- Preparation and Characterization of NaNO3/BFS Composite Phase Change Materials
- Thermogravimetric Analysis on Reduction Behavior of Powdery Dicalcium Ferrite
- Study on Application of Iron Ore Fine in Pelletizing
- Characterization of Different Clays for the Optimization of Mixtures for the Production of Ceramic Artifacts
- Part 10. Mineral Processing and Analysis
- Structural, Spectroscopic, Magnetic, and Thermal Characterizations of a Magnetite Ore from the Nagaland Region, India
- Humic Acid-based Silica Composite Aerogels
- A Preliminary Study
- Characterization of Non-covalently Functionalized Halloysite
- Synchrotron-based XRD and XANES Study of Bornite Leached by Mesophilic Mixed Bacteria
- Adsorption and Surface Area of Bentonite Modified Used as Bleaching Clay
- Investigation for Removal of Organic Carbon from Carbonaceous Copper Sulphide Ore and Improving the Recovery of Copper through Flotation
- Part 11. Nanostructure and Characterization of Materials
- Microwave Synthesis of Co-Ni Ferrite/Graphene Nanocomposite for Microwave Absorption
- Characteristics of WISCO Steelmaking Slags
- Effects of Civil Construction Waste on Properties of Lining Mortars
- Pilot Trial of Direct Modification of Molten Blast Furnace Slag and Production of High Acidity Coefficient Slag Wool Fibers
- Reduction Behavior of Ternary Calcium Ferrites for CaO-Fe2O3-MgO System
- Propagation of Power Ultrasound in Calcium Ferrite Melt
- Part 6. Characterization of Polymer and Composite Materials
- Dynamic-mechanical Analysis of Epoxy Composites Reinforced with PALF Fibers
- Characterization of PCBs from Obsolete Computers Aiming the Recovery of Precious Metals
- IZOD Impact Test Comparative Analyzis of Epoxy and Polyester Matrix Composites Reinforced with Hemp Fibers
- Effect of Neomycin in PVP Hydrogel as Wound Dressing
- Comparative Mechanical Analysis of Epoxy Composite Reinforced with Malva/Jute Hybrid Fabric by Izod and Charpy Impact Test